banjo bolt threads

[bamacl]

Does anyone know what the thread size is on the fuel line banjo bolts?

[rrekr]

Keihin Thread Sizes
Drain Screw_____________M6 X .75
Slide Stop Screw________M6 X .75
Idle Air Screw__________M6 X .75
Main Jet________________M5 X .9
NeedleJet Holder________M8 X 1.0
Float Needle Seat_______M9 X 1.0
Cable Adjuster__________M8 X .75
Pilot Jet_______________M4.5 X .75
Fuel Inlet______________M10 X 1.0 <------------

[bamacl]

Thank you. I tried a die that size but seemed wrong. Was not sure if it was the bolt or thread pitch. I've got a few carb bodies with bad threads that I want to try and repair. I've got nothing to lose but time and if it works as planed it might help others.