stripped screws on engine

bmarshall629 · Post by **bmarshall629** » Mon Jan 14, 2008 7:43 am

I'm traing to take the whole engine apart, and during the process I stripped a few of the screws that are in there like no other!! I attempted to use a "screw out" tool and it worked for a few but made a few more worse. Does anyone have any ideas or special drill bits that work. Looking for anything here.

thanks

ggray · Post by **ggray** » Mon Jan 14, 2008 8:23 am

Which specific screws are we talking about? Can you post some pics?

Gary

bmarshall629 · Post by **bmarshall629** » Mon Jan 14, 2008 10:54 am

it's the screws on the clutch cover, If I really need to add photos I will but I'll try to avoid that hassle

Hahnda · Post by **Hahnda** » Mon Jan 14, 2008 10:59 am

Best thing to use right from the beginning is an impact screwdriver. One of those that you hit with a hammer.

If they are already stripped you might try a vise grip on the head if you can get at it. I have also drilled the head off of the screw. Start out small and work your way up.

Buck · Post by **Buck** » Mon Jan 14, 2008 12:22 pm

Try a sharp center punch on the edge of screws.Start a spot on the screw to jar it loose in the direction to loosen the screw. It has worked for me many times.

bmarshall629 · Post by **bmarshall629** » Tue Jan 15, 2008 12:11 am

Thanks for all the tips, all screws have been removed!!

wombat200 · Post by **wombat200** » Wed Jan 16, 2008 5:56 pm

Sounds like the screws were not, in fact, stripped, but that the heads were broken off??

honda305.com Forum

honda305.com Forum

stripped screws on engine

stripped screws on engine

stripped screws

Stripped screws

all good