bare or painted?

johnzmg · Post by **johnzmg** » Fri Dec 28, 2007 10:34 pm

What is the correct finish on the CB77 cylinder, head and head side covers?

Thanks!
John

kustommusic · Post by **kustommusic** » Sun Dec 30, 2007 12:49 pm

John, The cyl. head is raw (unpainted) The engine side covers are painted or finished in some fashion. I guess I haven't paid enough attention to say what it is. I would guess paint, But whatever it is is some good stuff. If I were to refinish those I would go to powder coating. Hope that helps. Kustommusic

davomoto · Post by **davomoto** » Sun Dec 30, 2007 12:59 pm

Krylon dull aluminum seems to be the most widely accepted color for side cases. I use rustoleum heat resistent silver, and then shoot an automotive urethane top coat with hardener . This make it more resistent to gas and chips and scratches, and looks really nice as well.

davomoto

johnzmg · Post by **johnzmg** » Sun Dec 30, 2007 10:13 pm

Thanks for the information but I'm mainly looking for information on the finish on the cylinder and head parts.

Kustommusic, you mentioned the head is unpainted... can I assume that includes the head covers (point base and tach drive housing)? How about fins on the cylinders?

Thanks again,
John

kustommusic · Post by **kustommusic** » Mon Dec 31, 2007 5:52 pm

You sir, assume correctly ! Kustommusic

Honda305.com Forum

honda305.com Forum

bare or painted?

bare or painted?