honda305.com Forum

Vintage Honda Owners, Restorers, Riders and Admirers

Latest Registry Entry
1965 Honda CP77 — Ulsan Metro City, Rep. Korea
Restored with original parts — Owner: J. Doe

Clutch Cable Routing

Clutch, Transmission, Drive Chain, Sprockets
Post Reply
User avatar
Seadog
honda305.com Member
Posts: 1273
Joined: Thu Dec 25, 2014 9:54 am
Location: Cape Cod, MA

Post by Seadog » Thu Mar 30, 2017 4:29 pm

On the brake side, the clip is welded onto the inside of the fender strut. I think I recently saw the clip for the speedo side on eBay.

Edit to add: here you go http://www.ebay.com/itm/NOS-Honda-44852 ... AS&vxp=mtr

You'll need a 5mm x 10 screw to mount the clip, part #93500050100a, also available on ebay.
Top
texasgrape
honda305.com Member
Posts: 34
Joined: Mon Jun 20, 2016 6:02 pm
Location: Fredericksburg, TX

Post by texasgrape » Thu Mar 30, 2017 5:05 pm

Thanks Seadog! I just saw the brake side didn't have a bolt hole like the speedo side, so I was wondering . . . glad you cleared that up. I found the horn tag and a good grommet! I had them in a bag to be installed after paint. Gotta find a rattle can to match horn cover and carb covers. Will go to paint section later.
1967 305 Dream, 2006 Triumph Rocket III
Top
Post Reply

Return to “Transmission”