-
G-Man
- honda305.com Member
- Posts: 5678
- Joined: Wed Mar 25, 2009 5:17 pm
- Location: Derby, UK
-
Contact:
Post
by G-Man » Thu Mar 24, 2016 12:49 pm
Dave
Always good to see fresh ideas. Many thanks for sharing that.
G
dave_c wrote:Hi all, I'm a little late to this party but I wanted to show you what I ended up with as a very effective set of tools for pushing these pins out. From way back I had a seal puller and an old school automotive drum brake adjusting tool. Combining these as shown allowed a very controlled application of force to the back of the pin. Without the brake tool (or similar) backing up the seal puller, the fulcrum was in the wrong place and I broke the hardened tip of the puller.
'60 C77 '60 C72 '62 C72 Dream '63 CL72
'61 CB72 '64 CB77 '65 CB160
'66 Matchless 350 '67 CL77
'67 S90 '77 CB400F
-
CeeBee72
- honda305.com Member
- Posts: 19
- Joined: Sun Aug 21, 2016 6:56 am
- Location: Northampton
Post
by CeeBee72 » Thu Feb 08, 2018 3:04 pm
Just got to the point of dismantling the front forks and came across the pin removal problem. I designed and made a tool to push them from the inside. It worked a treat :-)
I have tried to upload a picture but get informed
"Tried to upload empty file"
Any ideas? JPG file of 353k
-
G-Man
- honda305.com Member
- Posts: 5678
- Joined: Wed Mar 25, 2009 5:17 pm
- Location: Derby, UK
-
Contact:
Post
by G-Man » Fri Feb 09, 2018 5:16 am
Use Flickr and put in a link. Simples.
G
CeeBee72 wrote:Just got to the point of dismantling the front forks and came across the pin removal problem. I designed and made a tool to push them from the inside. It worked a treat :-)
I have tried to upload a picture but get informed
"Tried to upload empty file"
Any ideas? JPG file of 353k
'60 C77 '60 C72 '62 C72 Dream '63 CL72
'61 CB72 '64 CB77 '65 CB160
'66 Matchless 350 '67 CL77
'67 S90 '77 CB400F
-
CeeBee72
- honda305.com Member
- Posts: 19
- Joined: Sun Aug 21, 2016 6:56 am
- Location: Northampton
Post
by CeeBee72 » Fri Feb 09, 2018 8:33 am
-
Seadog
- honda305.com Member
- Posts: 1272
- Joined: Thu Dec 25, 2014 9:54 am
- Location: Cape Cod, MA
Post
by Seadog » Fri Feb 09, 2018 8:57 am
You have to make the photo public.
-
CeeBee72
- honda305.com Member
- Posts: 19
- Joined: Sun Aug 21, 2016 6:56 am
- Location: Northampton
Post
by CeeBee72 » Fri Feb 09, 2018 9:12 am
Every day is an education! It should now be public.
-
Seadog
- honda305.com Member
- Posts: 1272
- Joined: Thu Dec 25, 2014 9:54 am
- Location: Cape Cod, MA
Post
by Seadog » Fri Feb 09, 2018 9:18 am
As it should be!
Nice tool. Your other photos are very good as well. Quite a project you have on your hands.
CeeBee72 wrote:Every day is an education! It should now be public.
