K&N FILTERS

SIDECAR77 · Post by **SIDECAR77** » Thu Oct 18, 2007 6:44 pm

THESE K&N FILTERS FIT VERY GOOD UNDER THE COVERS.

jesmed · Post by **jesmed** » Wed Oct 31, 2007 5:47 am

What's the K&N part number??

Vince Lupo · Post by **Vince Lupo** » Wed Oct 31, 2007 8:44 am

Sidecar -- Is there any kind of structural support back by the air filter, or are they just hanging there?
My only concern is that the stock air filters have that metal frame that bolts to the frame of the bike, thereby giving some support back there. I've been toying with the idea of trying to mount K&N's using the metal air fiilter frames from an old pair of stock filters that I have.

Did you have to do any carb adjustment after you installed these filters?

ggray · Post by **ggray** » Wed Oct 31, 2007 3:59 pm

Not sure if you'd be interested but this is how I solved my air filter problem:

I took the original filter housings, stripped away all the deteriorated paper filter element, repaired the damaged screen supports and applied these "UNI Filter" 5/8" foam elements using contact cement.

Bought the UNI Filter sheet from a local bike shop and there was enough for both filters and some left over. Total cost....$15.00

Gary

ggray · Post by **ggray** » Wed Oct 31, 2007 4:03 pm

Forgot to attach the photo............

LOUD MOUSE · Post by **LOUD MOUSE** » Wed Oct 31, 2007 4:18 pm

Those plug wires go down the middle between and under the carbs and the holders go straight down with the open end forward with a nice gentle bend.
Just trying to help. ..........................lm

ggray wrote:Forgot to attach the photo............

ggray · Post by **ggray** » Wed Oct 31, 2007 10:22 pm

Thanks Ed,

Haven't quite figured out where everything went at one time so any help is appreciated.

Gary

Honda305.com Forum

honda305.com Forum

K&N FILTERS

K&N FILTERS

Filters

Filters

Re: Filters

Filters