Home Auctions Gallery Forum

honda305.com Forum

Vintage Honda Owners, Restorers, Riders and Admirers

Shift linkage...

Clutch, Transmission, Drive Chain, Sprockets
Post Reply
R100
honda305.com Member
Posts: 332
Joined: Sun Jul 01, 2012 3:02 pm

Shift linkage...

Post by R100 » Wed Jan 07, 2015 2:19 pm

Mine was so sloppy as to be almost unusable. Holes in the knuckles and shift arms were worn oval and the two pins were badly worn. I figured that any used ones would probably be worn as well.
These Heim joint rod ends made a huge difference.
Attachments
shifter 003.JPG
shifter 003.JPG (173.78 KiB) Viewed 1649 times
Top
User avatar
G-Man
honda305.com Member
Posts: 5678
Joined: Wed Mar 25, 2009 5:17 pm
Location: Derby, UK
Contact:
Contact G-Man

Post by G-Man » Wed Jan 07, 2015 2:44 pm

Great mod...

Much more bearing area than the original pins and clevises.

G
'60 C77 '60 C72 '62 C72 Dream '63 CL72
'61 CB72 '64 CB77 '65 CB160
'66 Matchless 350 '67 CL77
'67 S90 '77 CB400F
Top
R100
honda305.com Member
Posts: 332
Joined: Sun Jul 01, 2012 3:02 pm

Post by R100 » Wed Jan 07, 2015 2:50 pm

G-Man wrote:Great mod...
Much more bearing area than the original pins and clevises.
G
These are 8mm because the rod (and holes) are 8mm. Could be bulkier/heavier than necessary.
In the future I might convert to 6mm. That's what is on my Hawk GT.
Top
Post Reply

Return to “Transmission”