Throttle cable routing

ggray · Post by **ggray** » Sat Aug 11, 2007 12:09 pm

Hi guys,

Just got a new throttle cable and after having the bike apart for so long I have a question regarding the routing of the two cables that go to each carb.

Does the cable run above the frame bar and then into each carb, efectually splitting the main frame bar. or do I route it under the main frame bar and then into each carb top?

Just want to make sure I get it right and avoid any cable binding.

Thanks,

Gary

fastjoe · Post by **fastjoe** » Mon Aug 13, 2007 3:48 pm

mine is routed under

LOUD MOUSE · Post by **LOUD MOUSE** » Mon Aug 13, 2007 6:02 pm

It comes inside the right side fork between the triple clamps then the splitter positions over the coils and the short pieces go to the carb tops. .................lm

ggray wrote:Hi guys,

Just got a new throttle cable and after having the bike apart for so long I have a question regarding the routing of the two cables that go to each carb.

Does the cable run above the frame bar and then into each carb, efectually splitting the main frame bar. or do I route it under the main frame bar and then into each carb top?

Just want to make sure I get it right and avoid any cable binding.

Thanks,

Gary

ggray · Post by **ggray** » Tue Aug 14, 2007 6:56 pm

Thanks Ed,

It didn't look right going over and splitting ABOVE the main frame tube.

Gary

Honda305.com Forum

honda305.com Forum