CB77 headers on a CB160?

[Jlovvorn]

I own both and could just try it and report back, but I thought I would ask first in case anyone has experince, and save a lot of cusing and frustration.

Repro cb77 headers are easy to find, but 160 are made of unobtainium.

I am going into non stock mufflers, so the only question is whether they will fit the 160 head.

Bonus points if anyone knows a non-Thai source for 160 header pipes.

Thanks!

[G-Man]

Pretty sure that the CB 160 pipes are smaller diameter and a different shape. You may be able to get yours restored if they aren't too bad.

G

[Hoosier Tom]

G is right. CB160 pipes are smaller diameter. CB77 pipes won't fit.

HT

[Jlovvorn]

Thanks for saving me the time guys.

Unfortunately, the bike had one two piece and one one piece, so I only have one header to work with, and its trashed.

I will look for some used and maybe try and find a chromer willing to do pipes.

[G-Man]

expensive but available

http://www.ebay.com/itm/Honda-CB-160-CL ... 8a&vxp=mtr

or cheap and nasty

http://www.ebay.com/itm/HONDA-CB160-CB1 ... bc&vxp=mtr

G

[Jlovvorn]

I bought the cheap ones, and they don't bend right.

The loop of the header sticks out so far that it almost contacts the front wheel. Well, not really.

When I get time, I will post a whole restoration thread. Took the bike all the way down to the last bolt, including the engine. Almost back.


160 build by Jrlovvorn, on Flickr


160 build 2 by Jrlovvorn, on Flickr

[G-Man]

Those look like pipes for a CA92/95.....

G