O-Rings Again

48lesco · Post by **48lesco** » Sat Feb 02, 2013 1:40 pm

If you need the o-ring that goes between the head and carb spacer, Honda part number 16173-260-004 is 29x2.4. Not sure why, but it's still available from Honda. Just got one in a parts order and it fits just right.
-48

piperjak · Post by **piperjak** » Wed Feb 27, 2013 10:58 pm

I matched one up at ACE hardware for $.43

48lesco · Post by **48lesco** » Thu Feb 28, 2013 9:10 am

That's great! Is it Viton or Buna? Sometimes those chinese o-rings from the hardware chains are meant for plumbing, not 200F service in a fuel/oil environment...
-48

piperjak · Post by **piperjak** » Thu Feb 28, 2013 9:26 am

It not a space ship. no worries! When it is sealed ~ how is gas going to touch it? Probably the same quality as the aftermarket honda stuff anyway. How do you know?

greg78gs750 · Post by **greg78gs750** » Thu Feb 28, 2013 10:19 am

buna won't last very long, but, hey, its easy enough to change out, just keep an eye you don't go too lean and blow things up

piperjak · Post by **piperjak** » Thu Feb 28, 2013 11:35 am

Very simple to change out. for sure!

honda305.com Forum

honda305.com Forum

O-Rings Again

O-Rings Again