honda305.com Forum

Vintage Honda Owners, Restorers, Riders and Admirers

Latest Registry Entry
1965 Honda CP77 — Ulsan Metro City, Rep. Korea
Restored with original parts — Owner: J. Doe

breather plate shield

Post Reply
rone
honda305.com Member
Posts: 25
Joined: Sat Nov 21, 2009 12:12 am
Location: Southern California

Post by rone » Sun May 06, 2012 11:12 am

Thanks for all the comments, guys. As to the metal plate, yes, the gasket is stuck (big time) to the bottom side. I appreciate all the advice!
Top
LOUD MOUSE
honda305.com Member
Posts: 7818
Joined: Mon Aug 15, 2005 8:23 am
Location: KERRVILLE, TEXAS

Post by LOUD MOUSE » Sun May 06, 2012 11:29 am

If it is the full gasket it is stuck to the top side. ..................lm
rone wrote:Thanks for all the comments, guys. As to the metal plate, yes, the gasket is stuck (big time) to the bottom side. I appreciate all the advice!
Top
rone
honda305.com Member
Posts: 25
Joined: Sat Nov 21, 2009 12:12 am
Location: Southern California

Yep, it is.

Post by rone » Mon May 07, 2012 9:52 pm

LM--Yes, it's the top gasket stuck to the breather plate. It left a nice footprint, too, which will be helpful on re-assembly. Thanks for all the advice!
Top
rone
honda305.com Member
Posts: 25
Joined: Sat Nov 21, 2009 12:12 am
Location: Southern California

Thank you!

Post by rone » Tue May 22, 2012 3:42 pm

Many thanks, everyone. It's now back together correctly and will go back in the bike later in the week.
Top
Post Reply

Return to “Motors - 247cc | 305cc | 337cc | 350cc”