need help with wiring up new condenser

[jimpapa]

hi, old condenser is fried.
received new one today but i'm confused.
old had 4 wires 2green/2 yellow
but new has only 2 wires. one yellow with a green band and one blue wire with a yellow band.
how would i connect this up?
thanks for any help
see image

[LOUD MOUSE]

I'd say ya have one for a 360 (DREAM) crank engine. ..........lm

hi, old condenser is fried.
received new one today but i'm confused.
old had 4 wires 2green/2 yellow
but new has only 2 wires. one yellow with a green band and one blue wire with a yellow band.
how would i connect this up?
thanks for any help
see image

[48lesco]

Looks to me like that one is for the bigger 1970's twins; CB450, 500T, etc. You sure your old one is bad?

[jimpapa]

yup, old one is bad for sure.
that came in a tuneup kit for a cb77 so'd assume it was correct.
just cant figure out how the wires should go

[48lesco]

It's the wrong condenser - picture of a CB77 condenser attached.

[jimpapa]

here's a link to where i ordered it from
http://www.power-barn.com/servlet/the-1 ... %2C/Detail

[48lesco]

Let's add that place to the list of where not to order from...