exhaust studs

cdf7640 · Post by **cdf7640** » Wed Aug 31, 2011 4:34 pm

Just measured the stud and it's 40mm long. The part that's exposed outside of the cyclinder head is around 28 though - you're right.

I found some replacement studs on this VW parts site:

http://www.wolfgangint.com/Parts/Studs/Type+2/

Never used a Helicoil - does it just lock the threads in tighter and ensure that it doesn't seize?

Thanks for the help!

Chris

Hahnda · Post by **Hahnda** » Wed Aug 31, 2011 4:45 pm

I just measured also and it is 40. Not sure where I'm getting 28.

Anyway the one you link to should work fine.

cdf7640 · Post by **cdf7640** » Thu Sep 01, 2011 1:11 pm

Perfect. I keep reading differing opinions on whether anti-seize, loctite, or nothing at all should be used when installing the new studs. What's your opinion?

Thanks for your help!

C

LOUD MOUSE · Post by **LOUD MOUSE** » Thu Sep 01, 2011 7:23 pm

I use Nothing. ........lm

cdf7640 wrote:Perfect. I keep reading differing opinions on whether anti-seize, loctite, or nothing at all should be used when installing the new studs. What's your opinion?

Thanks for your help!

C

cdf7640 · Post by **cdf7640** » Thu Sep 01, 2011 10:36 pm

Good to know. Thanks lm

Honda305.com Forum

honda305.com Forum

exhaust studs