Carb needle

Eljeef · Post by **Eljeef** » Mon Apr 25, 2011 4:44 pm

I'm still trying to get my C77 Dream running. Many issues but tackling them one at a time. Currentlly finishing up on the carb and knowing somebody else was messing with it I would like some opinion on where I should have the needle at in the clip. Right now it is on the last notch on the needle (at the end of the needle). Please bear in mind that it probably wasn't there when I got the bike and I've been having major issues getting it running or running properly. I would like to have it in the optimum spot efore I put it back together. Thanks, Jeff.

brewsky · Post by **brewsky** » Mon Apr 25, 2011 6:41 pm

Start with the needle in the middle position and adjust from there later if necessary.
Slow jet #35
Main jet #120

The needle should have 22401 or D3 stamped in it near the top.

Eljeef · Post by **Eljeef** » Tue Apr 26, 2011 7:45 am

brewsky wrote:Start with the needle in the middle position and adjust from there later if necessary.
Slow jet #35
Main jet #120

The needle should have 22401 or D3 stamped in it near the top.

Thanks Brewsky. That helps alot.

brewsky · Post by **brewsky** » Tue Apr 26, 2011 9:00 am

Eljeef wrote:
brewsky wrote:Start with the needle in the middle position and adjust from there later if necessary.
Slow jet #35
Main jet #120

The needle should have 22401 or D3 stamped in it near the top.
Thanks Brewsky. That helps alot.

No problem.....keep us up to date on progress

Eljeef · Post by **Eljeef** » Thu Apr 28, 2011 8:41 pm

OK. So I went to adjust my needle and this is what I found.

Is my needle broken as there are only two notches to choose from? Jeff H.

brewsky · Post by **brewsky** » Thu Apr 28, 2011 9:45 pm

What markings are on the needle?
it doesn't look right

Eljeef · Post by **Eljeef** » Fri Apr 29, 2011 4:30 pm

brewsky wrote:What markings are on the needle?
it doesn't look right

22401 and the honda symbol.

honda305.com Forum

honda305.com Forum

Carb needle

Carb needle

My 22401 Needle