honda305.com Forum

Vintage Honda Owners, Restorers, Riders and Admirers

Latest Registry Entry
1965 Honda CP77 — Ulsan Metro City, Rep. Korea
Restored with original parts — Owner: J. Doe

1965 CA77 Ignition Switch Internal Contact Position

Charging System, Wiring, Lighting
Post Reply
bjshealy
honda305.com Member
Posts: 29
Joined: Tue Jun 15, 2010 8:14 pm
Location: Texas

1965 CA77 Ignition Switch Internal Contact Position

Post by bjshealy » Mon Oct 25, 2010 4:49 pm

Does anyone have a diagram/photo showing the correct contact position inside the combination/ignition switch?
I was not getting the battery voltage to the starter (ST) but the ignition (IG) did have the 12 volts in the correct key positions. The switch was previously taken apart but appears to be all there. Three springs, 3 ball bearings, 3 insulators, and 3 triangle shaped three-contact terminals. However the 3 three-contact terminals can be installed 180 degrees out, having one contact or two contacts facing out.
A diagram or photo would help very much!!
Thank you.
Top
User avatar
brewsky
honda305.com Member
Posts: 1816
Joined: Wed Jul 23, 2008 5:21 am
Location: Princeton, WV

Post by brewsky » Mon Oct 25, 2010 6:22 pm

http://www.honda305.com/forums/viewtopic.php?t=6088
66 dream, 78 cb750k, 02fz1, 09 wing
Top
bjshealy
honda305.com Member
Posts: 29
Joined: Tue Jun 15, 2010 8:14 pm
Location: Texas

CA77 Combination Switch Internal Contacts

Post by bjshealy » Tue Oct 26, 2010 7:21 am

Thank you for the response. I have used both diagrams (the switch matrix and the wiring schematic)to troubleshoot the starter electrical problem to the internals of the switch itself. Now I need a photo or a diagram of the internal contact placement position. I have seen one in the past but cannot find it now that I need it!
I will keep you posted.
Many thanks again.
Top
LOUD MOUSE
honda305.com Member
Posts: 7818
Joined: Mon Aug 15, 2005 8:23 am
Location: KERRVILLE, TEXAS

Re: CA77 Combination Switch Internal Contacts

Post by LOUD MOUSE » Tue Oct 26, 2010 7:41 am

TEXAS is a large state.
What part are ya holding down?. .......lm

bjshealy wrote:Thank you for the response. I have used both diagrams (the switch matrix and the wiring schematic)to troubleshoot the starter electrical problem to the internals of the switch itself. Now I need a photo or a diagram of the internal contact placement position. I have seen one in the past but cannot find it now that I need it!
I will keep you posted.
Many thanks again.
Top
bjshealy
honda305.com Member
Posts: 29
Joined: Tue Jun 15, 2010 8:14 pm
Location: Texas

CA77 Combination Switch Internal Contacts

Post by bjshealy » Tue Oct 26, 2010 10:15 am

I reside in the Houston area ... La Porte, Texas.
Thanks.
BJS
Top
LOUD MOUSE
honda305.com Member
Posts: 7818
Joined: Mon Aug 15, 2005 8:23 am
Location: KERRVILLE, TEXAS

Re: CA77 Combination Switch Internal Contacts

Post by LOUD MOUSE » Tue Oct 26, 2010 10:55 am

Add that to ya profile?. .....lm

bjshealy wrote:I reside in the Houston area ... La Porte, Texas.
Thanks.
BJS
Top
e3steve
h305 Moderator
Posts: 2601
Joined: Fri Oct 31, 2003 1:38 pm
Location: Mallorca, Spain & Warsash, UK

Re: CA77 Combination Switch Internal Contacts

Post by e3steve » Wed Oct 27, 2010 6:17 am

bjshealy wrote:Thank you for the response. I have used both diagrams (the switch matrix and the wiring schematic)to troubleshoot the starter electrical problem to the internals of the switch itself. Now I need a photo or a diagram of the internal contact placement position. I have seen one in the past but cannot find it now that I need it!
I will keep you posted.
Many thanks again.
Welcome to The Forum. 5 position or 6 position combination switch?
Top
Post Reply

Return to “Electrical - Wiring”