Points Based Ignition | Electronic Ignition Upgrade
-
Goodysnap
- honda305.com Member
- Posts: 456
- Joined: Mon Oct 06, 2008 7:25 pm
- Location: Lansing , Michigan
Post
by Goodysnap » Sat Jun 05, 2010 6:43 pm
versuspop wrote:I'd be inclined to try easy outs before drilling out.
[/quote]
I was refering to just drilling off the head of the screw if it were stripped and no bite left. Not the threads. On smaller fasteners like these extracters tend to expand the metal. But its an option.
64' CB77
65' CB160
-
arch379r
- honda305.com Member
- Posts: 10
- Joined: Wed May 26, 2010 7:55 am
Post
by arch379r » Thu Jun 10, 2010 5:44 am
got cover off. drilled out screw heads. can not find replacement screws at my local hardware. what is the exact size . and does anybody know where i might get them? thanks for any help,
-
brewsky
- honda305.com Member
- Posts: 1816
- Joined: Wed Jul 23, 2008 5:21 am
- Location: Princeton, WV
Post
by brewsky » Thu Jun 10, 2010 7:06 pm
They are 5x30 probably "old" JIS threads...different pitch than current 5mm.
Might try Fast Fred on this board or Ohio Cycle.
66 dream, 78 cb750k, 02fz1, 09 wing
-
Goodysnap
- honda305.com Member
- Posts: 456
- Joined: Mon Oct 06, 2008 7:25 pm
- Location: Lansing , Michigan
Post
by Goodysnap » Thu Jun 10, 2010 7:30 pm
I cheated and retapped the holes to a more common screw thread. Many more screws available .
64' CB77
65' CB160
-
e3steve
- h305 Moderator
- Posts: 2601
- Joined: Fri Oct 31, 2003 1:38 pm
- Location: Mallorca, Spain & Warsash, UK
Post
by e3steve » Fri Jun 11, 2010 5:59 am
houseowax wrote:Mine aren't gone yet, but the heads are about to strip out. Removed them last time with a new pair of leverlocks but would like to replace them. My bike's a '63- where can I find replacements? Anyone know?
arch379r wrote:got cover off. drilled out screw heads. can not find replacement screws at my local hardware. what is the exact size . and does anybody know where i might get them? thanks for any help,
FASTFREDKOREN@aol.com has/had the OEM JIS screws.
