teazer wrote:LM are your big end bearings single rollers or the same pairs as OEM? I have some brass cages in stock somewhere. I got a pile of them and a couple of crank webs from a dealer who was closing.
What I don't have are light cages with single rollers.
We also discovered that stock Honda rollers often have sharp ends which cut into the cages causing cage cracking. We used to take every roller and relieve the ends by chamfering the corners slightly.
honda305.com Forum
Vintage Honda Owners, Restorers, Riders and Admirers
Latest Registry Entry
1965 Honda CP77 — Ulsan Metro City, Rep. Korea
Restored with original parts — Owner: J. Doe
Connecting Rod Supplier
-
LOUD MOUSE
- honda305.com Member
- Posts: 7818
- Joined: Mon Aug 15, 2005 8:23 am
- Location: KERRVILLE, TEXAS
Mine are Box Stock HONDA. ...........lm
I have had single roller cages (race kit) and paired roller cages in aluminum (stock CB72), and paired cages in Brass.
That makes me wonder if the brass ones were supplied by Honda from a different vendor. Guess we're probably a few decades late to work that one out. I would not use them in a high revving motor but they may be OK in a Dream.
That makes me wonder if the brass ones were supplied by Honda from a different vendor. Guess we're probably a few decades late to work that one out. I would not use them in a high revving motor but they may be OK in a Dream.