handle bars

e3steve · Post by **e3steve** » Mon Jan 11, 2010 7:12 am

Roger that, Brew; looks like the pukka, real-deal there!

brewsky · Post by **brewsky** » Mon Jan 11, 2010 8:14 am

Yep, complete with the signature: "The there is a slight twist/bend in the right hand side of the bar" note by the seller.
Apparantly the exit slot for the throttle cable creates a weak point in the bars and makes them succeptable to bending at that point from any significant impact on the bars.
Mine look exactly the same!

e3steve · Post by **e3steve** » Mon Jan 11, 2010 12:01 pm

I have to concur; my CA95 was exactly the same! Just a slight bend (backwards) from the PO (a mate, and it was his first bike) trying to pull wheelies........!! Errrr, not possible -- 17(?)bhp and quite front-heavy.

brewsky · Post by **brewsky** » Mon Jan 11, 2010 12:19 pm

e3steve wrote:.......... trying to pull wheelies........!! Errrr, not possible -- 17(?)bhp and quite front-heavy.

It is if you sit on the passenger part of the seat and weigh in excess of 200#!!

brewsky · Post by **brewsky** » Wed Jan 13, 2010 8:18 am

Another listing that probably would work. This one would convert the throttle back to the "early" style.
http://cgi.ebay.com/ebaymotors/Honda-CA ... 439c8a4557

brewsky · Post by **brewsky** » Thu Jan 21, 2010 7:49 am

Another listing here:
http://cgi.ebay.com/ebaymotors/HONDA-DR ... 20ad6631ba

honda305.com Forum

honda305.com Forum

handle bars