Compression tester recommendations

brewsky · Post by **brewsky** » Thu Oct 08, 2009 5:56 pm

Anyone have an Actron compression tester.
If so, any issues using the 12 mm adaptor in the head?
TIA

brewsky · Post by **brewsky** » Fri Oct 09, 2009 5:37 pm

Went ahead and got one.
Works great and has several size adaptors.
http://www.autozone.com/autozone/catalo ... ame=Actron

brewsky · Post by **brewsky** » Fri Oct 09, 2009 6:12 pm

OK, 135 LEFT CYL, 140 RIGHT CYL
engine cold, dry test, wide open throttle, air cleaner in place
Need I go any further??

Goodysnap · Post by **Goodysnap** » Fri Oct 09, 2009 7:40 pm

Rerun a wet test , just to see what the change is . I wouldnt be ashamed of those numbers.

brewsky · Post by **brewsky** » Wed Oct 21, 2009 5:20 am

Re-ran hot dry and hot wet tests, this time with air filter off:
141, 149..dry
150, 150..wet
But I'm wondering now if I had the tester snugged up enough on the 141 reading!
Time for another test.

chico · Post by **chico** » Wed Oct 21, 2009 5:32 am

Bill Silver says, 160 to 175, but that's right out of the box.

honda305.com Forum

honda305.com Forum

Compression tester recommendations

Compression tester recommendations