Engine Mounts Repair?

lhz55 · Post by **lhz55** » Sat May 31, 2008 10:35 pm

Hello again,
1965 CB77. The Frame has one of the rear 4 engine bolt tabs broke off. The missing tab is the top one near the tool box, left side. The other six ( 3 on top and 3 remaining in the rear) are fine. Do I find a welder to repair the missing bolt hole or can I safely run her on the remaining six?
Thanks, Lee

Kirk · Post by **Kirk** » Mon Jun 02, 2008 3:50 pm

I have a frame in the same shape , hate to toss it it has a title
Let me know if you try and have it welded?

Thanks,
Kirk

davomoto · Post by **davomoto** » Mon Jun 02, 2008 8:14 pm

Kirk, your's certainly looks like it could easily be repaired by a capable welder. Worth saving for sure since it's titled! Can't really say on the other without seeing it, but take it to a good welder and see what he thinks.

davomoto

lhz55 · Post by **lhz55** » Mon Jun 02, 2008 8:44 pm

Kirk, Thanks for the photo. Mine is excaltly like the photo. I bought another frame from Charlie
and the same mount was split. Seems like there should be a common cause for this failure. I will attempt to take before and after pictures on the welding.
Thanks Davomoto & Kirk.
Lee

Dogsbd · Post by **Dogsbd** » Mon Jun 02, 2008 10:07 pm

Seems to me a decent welder could cut the remainder of that tab off, fab a replacement and weld it in place.

Kirk · Post by **Kirk** » Tue Jun 03, 2008 11:42 am

Thank you for your replies Dogsbd, Davomoto and lhz55

Will update on any progress

Thanks,
Kirk

Honda305.com Forum

honda305.com Forum

Engine Mounts Repair?

Engine Mounts Repair?

engine mount repair