Correct Stator Output????

dux66 · Post by **dux66** » Sat Apr 05, 2008 8:13 pm

Does anyone know the correct output voltage on the AC generator wires? I have 6v on brown and yellow and 8v on purple. Also correct DC voltage after the rectifier? I read 30v leaving rectifier. (soild State 42amp from Oregon Motorcycle) I know this is high but for some reason thats what i am reading. I read through Bill Silvers engine repair guide but did not see this mentioned.
Thanks

joeweir1 · Post by **joeweir1** » Mon Apr 07, 2008 4:44 pm

What bike? CB CL CA?

dux66 · Post by **dux66** » Mon Apr 07, 2008 7:37 pm

Sorry
CB77 65-67

joeweir1 · Post by **joeweir1** » Tue Apr 08, 2008 8:32 am

Did you look thru any old posts because there is some discussions on charging which may have some info for you.Are you losing voltage or battery draining?Info I have for CA77 is 6 V on the yellow and brown also.It also says output from rect. to batt.(red with white stripe) should be 13-14.5 volts with engine over 3000rpm. system has potential of 30VDC.Hopefully a CB guy will chime in, but they use the same stators and rotors I believe.