1966 ca-77 spinner/filter clean

nation · Post by **nation** » Sun Dec 29, 2019 4:46 pm

do you guys know of a video or photo guide to doing that job. I find the threads on that difficult. Jim

Muddy · Post by **Muddy** » Mon Dec 30, 2019 2:25 am

Sorry, can't help with the video or pictures, but it was easy to do. The hard part was getting the spinner apart - after many years of neglect, it was pretty tight to get apart.

Muddy · Post by **Muddy** » Mon Dec 30, 2019 2:33 am

This is how the spinner looked when it came apart.

: 100_2775.jpg (52.2 KiB) Viewed 5544 times

brewsky · Post by **brewsky** » Mon Dec 30, 2019 6:15 am

I got tired of fighting it and just soak the whole thing in gas to clean it out.

Then wash and rinse.

DJM · Post by **DJM** » Mon Dec 30, 2019 9:01 am

Are you wanting to know how to dismantle the filter to clean it or how to get it out of the case and replace it afterwards.

Nither is difficult but, as in all things Honda, a bit of advice can help.

nation · Post by **nation** » Wed Jan 01, 2020 11:03 am

yeah, both, once I see it I'm sure all the written directions will make sense? But when I read it its hard to relate cuz I haven't opened it up before. I have to do it because I just don't know how bad it is. it might be clean as a whistle. judging by the rest of the bike it will be but who knows. and its been sitting for 10 years

Honda305.com Forum

honda305.com Forum

1966 ca-77 spinner/filter clean

1966 ca-77 spinner/filter clean

Re: 1966 ca-77 spinner/filter clean

Re: 1966 ca-77 spinner/filter clean

Re: 1966 ca-77 spinner/filter clean

Re: 1966 ca-77 spinner/filter clean

Re: 1966 ca-77 spinner/filter clean