honda305.com Forum

Vintage Honda Owners, Restorers, Riders and Admirers

Latest Registry Entry
1965 Honda CP77 — Ulsan Metro City, Rep. Korea
Restored with original parts — Owner: J. Doe

ca95 petcock bolts and plate

Looking for Bikes, Parts, Etc.? Post it here or try the New Honda305.com Auctions !!!
Post Reply
3BeanCrispy
honda305.com Member
Posts: 166
Joined: Wed Mar 19, 2008 7:26 am
Location: Punxsutawney, PA

ca95 petcock bolts and plate

Post by 3BeanCrispy » Fri Jul 03, 2009 2:09 pm

trying to find some 5mm bolts for ca95 petcock. also need a spring plate if anyone has one to part with. may try to rig in a conical spring washer to fill the need for tension on the plate. i have the plate, but all 4 'tangs' were broken off. thanks !

matt in PA
Top
joeweir1
honda305.com Member
Posts: 761
Joined: Wed Mar 08, 2006 9:35 am
Location: middletown,pa

Post by joeweir1 » Fri Jul 03, 2009 8:06 pm

Bean-I got some 5mm from a Honda dealer I believe for my CA77 petcock.Not sure what to tell you about the spring plate.Joe in PA also
Top
3BeanCrispy
honda305.com Member
Posts: 166
Joined: Wed Mar 19, 2008 7:26 am
Location: Punxsutawney, PA

Post by 3BeanCrispy » Fri Jul 03, 2009 9:25 pm

when i look at cmsnl ca77 parts diagram it's showing 6mm. the ca95 is , unfortunately, 5mm. doesnt look like theres enough clearance/sidewall to take it out to 6 either.
hmm ... looks like cmsnl may have the 5mm's ... lol.
thanks for the reply !
Top
joeweir1
honda305.com Member
Posts: 761
Joined: Wed Mar 08, 2006 9:35 am
Location: middletown,pa

Post by joeweir1 » Sat Jul 04, 2009 6:48 am

Sorry about that, been a few years since I got them and I now I recall finding a 6mm tap to clean out the threads .You could still try the dealer for some.Joe
Top
Post Reply

Return to “Wanted - Parts | Bikes | Services”