honda305 Home honda305 Auctions honda305 Gallery honda305 Forum

honda305.com Forum

□ Login
□ Search
□ FAQ 
□ 
Vintage Honda Owners,
Restorers, Riders and
Admirers

Use a 61mm gasket for big bore

Post Reply
Geeky160
honda305.com Member
Posts: 138
Joined: Tue May 13, 2008 6:00 pm
Location: New Mexico, USA

Use a 61mm gasket for big bore

Post by Geeky160 » Wed Aug 20, 2014 6:04 pm

I'm rebulding the top end of my CL77 with the old big bore pistons and new BB rings 63mm. I haven't found a big bore head gasket yet. My question is, is there anyway I can modify my new 61mm as measured head gasket to work with this setup? Thanks
'67 CL77 (337, gears X'd)
'65 CB160
Top
Geeky160
honda305.com Member
Posts: 138
Joined: Tue May 13, 2008 6:00 pm
Location: New Mexico, USA

Post by Geeky160 » Thu Aug 21, 2014 6:14 pm

I ended up ordering a 63mm gasket from cometic.
'67 CL77 (337, gears X'd)
'65 CB160
Top
Post Reply

Return to “Motors - 247cc | 305cc | 337cc | 350cc”

 

CB-77 | CYP-77 | Road Test | Riding Log | Literature | Zen | Marketplace | VJ Survey | Links | Home