honda305 Home honda305 Auctions honda305 Gallery honda305 Forum


honda305.com Forum

Login
□ Search
□ FAQ 
□ 
Vintage Honda Owners,
Restorers, Riders and
Admirers

Kick start spring

Clutch, Transmission, Drive Chain, Sprockets
LOUD MOUSE
honda305.com Member
Posts: 7817
Joined: Mon Aug 15, 2005 8:23 am
Location: KERRVILLE, TEXAS

Post by LOUD MOUSE » Sun Jun 05, 2016 9:04 pm

Be sure to turn the KS shaft right to stop then do as you say. .................lm
pdphillips54 wrote:I tightened the spring inside the R/S cover so that I could align the two gears 0 marks. Once I let go, of course, the spring unwinds. On the outside of the R/S cover, I align the start shaft mark with the kick start lever mark. Now, to install the R/S cover, must I tighten the spring (pre-load), using the kick start lever, so that the inside gears have the 0 aligned (spring under tension) as I fit the R/S cover on the motor? That puts the kick start shaft/lever marks at about 12 o'clock. Thank for your help.

pdphillips54
honda305.com Member
Posts: 5
Joined: Wed Mar 30, 2016 7:39 pm
Location: Fort Worth, TX

Post by pdphillips54 » Mon Jun 06, 2016 5:34 pm

Will do. Thanks.

LOUD MOUSE
honda305.com Member
Posts: 7817
Joined: Mon Aug 15, 2005 8:23 am
Location: KERRVILLE, TEXAS

Post by LOUD MOUSE » Mon Jun 06, 2016 5:36 pm

You are welcome. .................................lm

pdphillips54 wrote:Will do. Thanks.

Luss71
honda305.com Member
Posts: 1
Joined: Mon May 24, 2021 5:05 pm

Re: Kick start spring

Post by Luss71 » Mon May 15, 2023 5:36 am

Hi,

I know this topic is old but i have the same problem....
Is there any pictures or videos that could help me!?!

Thank you

Bert

Post Reply




 

CB-77 | CYP-77 | Road Test | Riding Log | Literature | Zen | Marketplace | VJ Survey | Links | Home