honda305.com Forum

Vintage Honda Owners, Restorers, Riders and Admirers

Latest Registry Entry
1965 Honda CP77 — Ulsan Metro City, Rep. Korea
Restored with original parts — Owner: J. Doe

pistons

Post Reply
bsa lover
honda305.com Member
Posts: 18
Joined: Fri Jul 15, 2011 2:07 am
Location: Eatonville Wa.

pistons

Post by bsa lover » Fri Sep 09, 2011 12:58 am

I have to bore my CL-250, looks like its going to be 1mm over or more, if the prevouis bore wasn't done right, then more, how much over can i safely go and are there any ca or cl pistons in the 1mm and over, looking on e bay 1mm seems to be about it
Top
Hahnda
honda305.com Member
Posts: 835
Joined: Wed Nov 02, 2005 2:36 pm
Location: Cameron, WI

Post by Hahnda » Fri Sep 09, 2011 8:35 am

You have a CL72 and you are looking for 1mm or more oversized pistons and rings. I might be able to help you out. I have some that are 3mm oversize I think. I also have some that aren't oversized as much as that.
Top
wmcfrazier
honda305.com Member
Posts: 1
Joined: Wed Oct 19, 2011 10:06 pm

Post by wmcfrazier » Wed Oct 19, 2011 10:21 pm

Kevin, My CL77 is 1mm over and I am looking for new pistons and rings. What do you have and what is the mfgr. Your post says 2.5mm over ?

Bill
Top
Post Reply

Return to “Motors - 247cc | 305cc | 337cc | 350cc”