Problem with timing points plate, anyone see this before ?

maia · Post by **maia** » Wed Jun 08, 2011 7:26 pm

Have you just replaced the cam chain ? I had a similar situation and turns out I had the chain one tooth off from the correct position and could get the correct plate position but only with the screw out.

mike horvath · Post by **mike horvath** » Thu Jun 09, 2011 1:24 am

So maia,
How'd you remedy your problem?

hillhudson · Post by **hillhudson** » Thu Jun 09, 2011 3:48 am

maia,
i used the stock cam chain and it is most definitely installed correctly. interesting take on the problem tho wouldn't have ever considered that one. thanx for the help..

teazer · Post by **teazer** » Thu Jun 09, 2011 4:16 pm

Worn cam chain? or machined some off the barrels or head perhaps?

honda305.com Forum

honda305.com Forum

Problem with timing points plate, anyone see this before ?

cam chain