honda305.com Forum

Vintage Honda Owners, Restorers, Riders and Admirers

Latest Registry Entry
1965 Honda CP77 — Ulsan Metro City, Rep. Korea
Restored with original parts — Owner: J. Doe

case punched

Post Reply
joeweir1
honda305.com Member
Posts: 761
Joined: Wed Mar 08, 2006 9:35 am
Location: middletown,pa

case punched

Post by joeweir1 » Fri May 21, 2010 11:40 am

Anyone see a case with punch marks before that were put there to I assume to hold seal in?Photo is alittle blurry but you can see them around the seal.
Attachments
000_1095.jpg
Top
LOUD MOUSE
honda305.com Member
Posts: 7818
Joined: Mon Aug 15, 2005 8:23 am
Location: KERRVILLE, TEXAS

Re: case punched

Post by LOUD MOUSE » Fri May 21, 2010 11:47 am

That was/is used as ya say to hold the seal in place.
Not a HONDA engine item when the bike was issued for sale. ..........lm

joeweir1 wrote:Anyone see a case with punch marks before that were put there to I assume to hold seal in?Photo is alittle blurry but you can see them around the seal.
Top
joeweir1
honda305.com Member
Posts: 761
Joined: Wed Mar 08, 2006 9:35 am
Location: middletown,pa

Post by joeweir1 » Fri May 21, 2010 9:00 pm

LM-Was this a common practice? This was the first time I had seen this on the 4 or 5 engines I tore apart.
Top
LOUD MOUSE
honda305.com Member
Posts: 7818
Joined: Mon Aug 15, 2005 8:23 am
Location: KERRVILLE, TEXAS

Post by LOUD MOUSE » Fri May 21, 2010 9:12 pm

Nah!
I've seen it a couple of times.
One of those MYTHS as to what needed to be done in the time!. .............lm

joeweir1 wrote:LM-Was this a common practice? This was the first time I had seen this on the 4 or 5 engines I tore apart.
Top
Post Reply

Return to “Motors - 247cc | 305cc | 337cc | 350cc”