honda305 Home honda305 Auctions honda305 Gallery honda305 Forum


honda305.com Forum

Login
□ Search
□ FAQ 
□ 
Vintage Honda Owners,
Restorers, Riders and
Admirers

Two types of Cylinder Head Caps both for 305?

Have a part and no Part Number? No idea where it's from and where it goes? Post a description and a photo here!
Steverino
honda305.com Member
Posts: 409
Joined: Wed Nov 05, 2014 10:22 pm
Location: Oregon

Two types of Cylinder Head Caps both for 305?

Post by Steverino » Wed Sep 23, 2015 1:32 pm

The two types are on my 67 CB77. It probably wasn't assembled that way at the factory. Which is correct?
Thank You
Steve

ImageKIMG0678 by Steve Steverinomeister, on Flickr


They clean up real nice.

ImageKIMG0683 by Steve Steverinomeister, on Flickr

rrietman
honda305.com Member
Posts: 561
Joined: Mon Oct 13, 2008 6:45 pm
Location: bellingham wa.

Post by rrietman » Wed Sep 23, 2015 3:59 pm

the one on the right is correct for a late engine. the other one I have not seen before?
Randy

OldStan
honda305.com Member
Posts: 548
Joined: Wed Jul 14, 2010 5:33 pm
Location: Galt, California

Post by OldStan » Wed Sep 23, 2015 8:02 pm

rrietman wrote:the one on the right is correct for a late engine. the other one I have not seen before?
Randy
The one on the left is what is on my unmolested 67 CL77. I would think a 67 CB77 would be the same. The one on the right was used on my late 63 CA78. They were changed then, or earlier, from a third style.
63 CA78

Hoosier Tom
honda305.com Member
Posts: 817
Joined: Fri Aug 15, 2008 10:34 pm
Location: Logansport, IN

Post by Hoosier Tom » Wed Sep 23, 2015 8:03 pm

The one on the left appeared on the latest engines. I have owned four of the late 1967 candy CL77s and they all had the tappet cover on the left.

HT

rrietman
honda305.com Member
Posts: 561
Joined: Mon Oct 13, 2008 6:45 pm
Location: bellingham wa.

Post by rrietman » Wed Sep 23, 2015 9:17 pm

well; I have learned something. I have about 30 250/305 engines sitting around and 6 running bikes. I have not seen that cover on the left. I have plenty of the early domed and the later flat ones.
Randy

User avatar
sixtiescycle
honda305.com Member
Posts: 271
Joined: Sat Jan 19, 2013 7:13 pm
Location: Gresham, OR

Post by sixtiescycle » Mon Sep 28, 2015 2:33 pm

Steve,
I have some decent extras if you need to make up a matched set.
Attachments
IMG_0476.JPG
IMG_0476.JPG (246.78 KiB) Viewed 2100 times
Dick Johnson
'61 CB92
'63 domestic CL72 Type 2
'63 CL72
'65 CL77
'66 CB77
'67 CB450D
'71 SL350
'71 XS1B

LOUD MOUSE
honda305.com Member
Posts: 7817
Joined: Mon Aug 15, 2005 8:23 am
Location: KERRVILLE, TEXAS

Re: Two types of Cylinder Head Caps both for 305?

Post by LOUD MOUSE » Mon Sep 28, 2015 3:23 pm

I'll get in on this one.
If you have a true 1967 the one on the left is the style HONDA issued on the engine. ...........lm

l
Steverino wrote:The two types are on my 67 CB77. It probably wasn't assembled that way at the factory. Which is correct?
Thank You
Steve

ImageKIMG0678 by Steve Steverinomeister, on Flickr


They clean up real nice.

ImageKIMG0683 by Steve Steverinomeister, on Flickr

Post Reply
cron




 

CB-77 | CYP-77 | Road Test | Riding Log | Literature | Zen | Marketplace | VJ Survey | Links | Home