hey, another way that works pretty well is to link them from a photobucket account....just to give you another option....
greg
honda305.com Forum
Vintage Honda Owners, Restorers, Riders and Admirers
Ignition ID
-
greg78gs750
- honda305.com Member
- Posts: 73
- Joined: Tue Apr 21, 2009 5:14 pm
- Location: muskegon, mi
igition switch
Appears to be from a CB 160,
If you could show a picture of all of the wires going in to the socket I could tell for sure.
If you could show a picture of all of the wires going in to the socket I could tell for sure.
-
honda carl
- honda305.com Member
- Posts: 26
- Joined: Thu Mar 11, 2010 1:02 pm
- Location: Cleveland, Ohio
Ignition ID
Mike- I'm not sure I'm following your request. Should I take a photo of the wires at the point where they are routed into the plastic connector or where the wires are soldered on the back of the switch itself (which is covered by the rubber boot)? Thanks.
Carl
Carl
ignition switch
Carl, Where they go into the plastic connector. I need to see all of the colors of the wires and their positions in it.
Mike
Mike
-
honda carl
- honda305.com Member
- Posts: 26
- Joined: Thu Mar 11, 2010 1:02 pm
- Location: Cleveland, Ohio
Ignition ID
Mike- I checked out some CB160 switches on ebay and they look like mine. But to be sure, I'm attaching a couple more photos showing the wiring. Thanks again for your help.
And thanks to everyone who responded.
Carl
And thanks to everyone who responded.
Carl
- Attachments
-
-