Charging System, Wiring, Lighting
-
Billiam
- honda305.com Member
- Posts: 50
- Joined: Tue Sep 06, 2016 2:48 am
- Location: Berkshire UK
Post
by Billiam » Wed Sep 07, 2016 2:34 am
Hi, glad I qualified my post with "I'm no expert". Will try to digest that all that info.
At the least, it got the conservation going.
Cheers.
-
Seadog
- honda305.com Member
- Posts: 1272
- Joined: Thu Dec 25, 2014 9:54 am
- Location: Cape Cod, MA
Post
by Seadog » Wed Sep 07, 2016 7:32 am
mike in idaho wrote:...Connecting the voltage sense wire to the ignition circuit(instead of the battery) will insure the coils get full voltage even if there is resistance in the main switch or the wiring.
Pardon me, but what "sense wire", Mike? I don't understand.
-
Billiam
- honda305.com Member
- Posts: 50
- Joined: Tue Sep 06, 2016 2:48 am
- Location: Berkshire UK
Post
by Billiam » Wed Sep 07, 2016 7:57 am
Err, lets make that "Conversation". So embarrassing.
-
Seadog
- honda305.com Member
- Posts: 1272
- Joined: Thu Dec 25, 2014 9:54 am
- Location: Cape Cod, MA
Post
by Seadog » Wed Sep 07, 2016 8:34 am
Billiam wrote:Err, lets make that "Conversation". So embarrassing.
Autocorrect, the bane of mankind.
-
revlover
- honda305.com Member
- Posts: 169
- Joined: Sun Jul 12, 2015 5:06 am
- Location: Shepherdsville, KY
Post
by revlover » Wed Sep 07, 2016 3:52 pm
Seadog wrote:mike in idaho wrote:...Connecting the voltage sense wire to the ignition circuit(instead of the battery) will insure the coils get full voltage even if there is resistance in the main switch or the wiring.
Pardon me, but what "sense wire", Mike? I don't understand.
If you look at the Sparck Moto site, their rec/reg has a black sensing wire that goes to 12v+ switched.
"If the women don't find you handsome, they should at least find you handy." Red Green
