honda dream 4e

alan curtis · Post by **alan curtis** » Thu May 05, 2016 2:02 am

just picked up a dream 4e, it is a runner,smokes a bit,missing a few parts, like they all do, came at the right money, so could not turn down. may just sit here a while.
if anyone has any spares parts, i.e., handlebar levers, ign switch, ammeter, seat. it does have the correct mudguards as well, which are not on the bike..

raytrix · Post by **raytrix** » Thu May 05, 2016 12:05 pm

Hi looks great sorry I can't help with parts was going to contact you about a jc56 iv just bought ....I'm after fuel tap, the rubber between engine and chain guard and tank badges. My bike has the wrong tank fitted but I do have the correct one but in bad condition. Any help would be usefull

alan curtis · Post by **alan curtis** » Fri May 06, 2016 3:19 am

hi, don't have any jc56 parts, i am sure there are repro badges for them, how bad is the tank, you could sent it to a chap called Terry hall, in Shewsbury, he has repaired many a scrap tank for me. not sure if anyone has done the chain case rubbers, but there has been a few of these bikes restored , so iam sure someone must do them, you may have to use a tap that fits till you can find one.
have you tried yahoo in japan.
where are you in uk.

alan curtis · Post by **alan curtis** » Fri May 06, 2016 4:24 am

have you tried this company..
http://www.claussstudios.com/id85.html
try ray for badges, don't know if he done the jc bikes.
http://www.ebay.com/itm/Honda-CB-160-Ta ... zw&vxp=mtr

alan curtis · Post by **alan curtis** » Fri Sep 16, 2016 2:21 pm

Now have a uk registration number for the dream 4e. does anyone have the same model in the uk..

raytrix · Post by **raytrix** » Thu Nov 03, 2016 3:39 pm

Hi Alan I managed to find a nos fuel tap and ignition switch on ebay ....there was a guy selling a load of bits a few weeks back I spent a fair bit but as you know it's not something you see come up that often.... How's the 4e comeing along?
Cheers ray

alan curtis · Post by **alan curtis** » Fri Nov 04, 2016 3:59 am

Hi ray, Not done a lot with it yet, Got a rear rack from the same seller as you got your switch from.
have got a uk reg number for it now, so that a big pain out of the way. one of the members on this forum is making the rubbers for the tank, rear foot rests and elec connections on the engine
it is terecha. (jakub) in polland. go to MF350.

Honda305.com Forum

honda305.com Forum

honda dream 4e

honda dream 4e

4e honda

honda dream e

honda dream 4e

dream 4e

4e