braided lines...

Sascha · Post by **Sascha** » Fri Nov 26, 2010 11:53 am

Hey Guys,

So I have a bit on an issue...

I replaced the internal throttle with a single pull cable throttle mechanism and it seems to be an issue as the exposed portion of the cable isnt long enough to fit in both the carb and the throttle housing... Thoughts?

-Sascha

Hahnda · Post by **Hahnda** » Fri Nov 26, 2010 12:09 pm

You are going to need a custom cable or remove some of the sheathing on the current cable.

davomoto · Post by **davomoto** » Fri Nov 26, 2010 12:55 pm

Yes, I just did the operation yesterday. I heated up the ferrule with a lighter, slid it of off the housing. I then stripped off the plastic sheathing, and took a dremmel with a cut off wheel, and carefullully cut each loop of metal off without hitting the cable.

Davo

Sascha · Post by **Sascha** » Fri Nov 26, 2010 2:33 pm

Yeah I think im going to have to go down that road... I will let you guys know how it goes.
Sascha