Rectifier color code

ROBM50 · Post by **ROBM50** » Thu Apr 23, 2009 11:55 pm

Hey guys! I have a 1966 305 Dream and I'm wanting to install a solid state rectifier that I purchased from Oregon Motorcycle Parts. My question is concerning the wires that are currently attached to my Selenium type rectifier. I have a red one that I know is the positive, two other wires, one being yellow and the other brown. I know that the latter two go to the stator and my question is which one would be considered the ground? I appreciate all the help that I've gotten previously from you guys! Rob

albano.martins · Post by **albano.martins** » Fri Apr 24, 2009 10:51 am

Hi ROBM50!

It depends which rectifier do you have.

If you have the 42 Amp 3 wire Rectifier with Screw connectors:

Brown ----> Yellow
Yellow -----> Yellow
Red -----> Red

The Black one you ground to the frame (you can use the old support to ground it).

Albano Martins

ROBM50 · Post by **ROBM50** » Fri Apr 24, 2009 11:54 am

Hey thanks Albano! I do have the 42 amp rectifier with the two yellow coded terminals and one red one, and the black ground wire that you speak of! My question is, does it matter which one of the yellow terminals on the rectifier the brown wire off the stator attaches to?

albano.martins · Post by **albano.martins** » Fri Apr 24, 2009 12:29 pm

It doesn't matter which one of the yellow terminals you connect the brown wire.

Albano Martins

ROBM50 · Post by **ROBM50** » Fri Apr 24, 2009 4:11 pm

Got it Albano and thanks again!

Honda305.com Forum

honda305.com Forum

Rectifier color code

Rectifier color code

Thanks!

Thaks again