ANyone replaced their fuel tap/petcock with aftermarket?
-
- honda305.com Member
- Posts: 10
- Joined: Mon Nov 01, 2010 10:06 pm
- Location: Maple Valley, Washington
ANyone replaced their fuel tap/petcock with aftermarket?
I really want to put a new shiny Pingel fuel tap on my '65 Super Hawk. However it appears that this tank uses a cross-over tube from the right side of the tank as the reserve capacity. Has anyone run an Pingel, and if so: 1> what size did you use? Does anyone know the thread on the tank offhand? and 2> what did you do with the crossover tube?
-
- honda305.com Member
- Posts: 528
- Joined: Sun May 16, 2010 4:39 pm
- Location: Temple, GA
- Contact:
You could always polish your petcock a bit to make it look new.
As for the adjacent tube, you could plug it up if you value looks more. When I bought my bike, someone had capped the other side off already. I'm guessing so the tank was easy to remove without spilling gas everywhere. Not sure that's it's really a reserve tube more than it was to just get the last bit of gas from the other side of the tank over.
As for the adjacent tube, you could plug it up if you value looks more. When I bought my bike, someone had capped the other side off already. I'm guessing so the tank was easy to remove without spilling gas everywhere. Not sure that's it's really a reserve tube more than it was to just get the last bit of gas from the other side of the tank over.