I've been using Ed Moore's ignition timing procedure and I gotta say I like it.
But, being me, I'm having some difficulty.
When I get the right hand points adjusted for the light to come on at the T F mark I can't get the left points to set properly. I should mention that the cam plate is adjusted to the extreme counter clockwise position to achieve the timing position for the right points.
In that circumstance I cannot adjust the left points to open on the L F mark. As a result it fires just a bit after TDC on the left side. Not so good a happening.
The marks on the cam shaft end seem to be aligned with the crankshaft at the right times, etc.
New points too.
Anybody have any clues?
Thanks.
Spark in the wrong place and time
Re: Spark in the wrong place and timeLooking back at your other messages causes me to ask.
"Have you had the head off. Where do you live and may I have your phone number. .................lm
|