Body parts 305 dream vs baby dream

[hotrodhendrix]

Currently on the hunt for front & rear fenders, left side box cover, carb covers and lower/upper chain covers. Do any of these parts carry over from the baby dream? Mine is a late CA77 or CA78

Also wondering if these would fit mine?
http://www.ebay.com/itm/HONDA-CB200-CL2 ... 2627wt_799

~James

[conbs]

I don't think any of the listed parts will interchange. the Baby Dreams are about 80% fo the size of the 250/305's.

But, the hand grips might fit. The I.D. of the grips are two different sizes because of the tube for the throttle and the smaller one needs to fit 7/8" handlebars.

Ask lots of questions before you buy and compare part numbers and application.

[hotrodhendrix]

I don't think any of the listed parts will interchange. the Baby Dreams are about 80% fo the size of the 250/305's.

But, the hand grips might fit. The I.D. of the grips are two different sizes because of the tube for the throttle and the smaller one needs to fit 7/8" handlebars.

Ask lots of questions before you buy and compare part numbers and application.

Thanks for the info. I was under the impression that the baby dreams used the same frame as the 305. Anyone else able to back up this info?

~James

[G-Man]

Conbs is correct. Different bike altogether. They are just styled the same. It would be pushing a bit for a 125cc bike to lug around the same cycle parts as a 305...

G

[hotrodhendrix]

Gotcha. Thanks for the info guys!

[snakai]

If you get the C71 flat bars these just might fit as I have been told that the throttle tube on the C71 flat bars is the same as c92 Ca92 C95 CA95