Home Auctions Gallery Forum

honda305.com Forum

Vintage Honda Owners, Restorers, Riders and Admirers

Clutch plates--Do the channels have to line up?

Clutch, Transmission, Drive Chain, Sprockets
Post Reply
Cheburashka
honda305.com Member
Posts: 122
Joined: Sun Feb 20, 2011 10:07 pm
Location: Moses Lake, WA

Clutch plates--Do the channels have to line up?

Post by Cheburashka » Fri Sep 21, 2012 11:05 am

I had a sticking clutch so I took it apart to get the rust off of the plates. Now, putting it back together, I notice that the plates have a rounded slot cut every four teeth and pointing toward the outer rim. Are these supposed to line up with each other, or not line up with each other, or does it make any difference at all?

Thanks
Top
LOUD MOUSE
honda305.com Member
Posts: 7817
Joined: Mon Aug 15, 2005 8:23 am
Location: KERRVILLE, TEXAS

Re: Clutch plates--Do the channels have to line up?

Post by LOUD MOUSE » Fri Sep 21, 2012 11:25 am

Just install them.
There is no certain location for the slots. ........lm


Cheburashka wrote:I had a sticking clutch so I took it apart to get the rust off of the plates. Now, putting it back together, I notice that the plates have a rounded slot cut every four teeth and pointing toward the outer rim. Are these supposed to line up with each other, or not line up with each other, or does it make any difference at all?

Thanks
Top
Post Reply

Return to “Transmission”