honda305.com Forum

Vintage Honda Owners, Restorers, Riders and Admirers

Latest Registry Entry
1965 Honda CP77 — Ulsan Metro City, Rep. Korea
Restored with original parts — Owner: J. Doe

CB72: 14mm Bushing - which way round ?

Clutch, Transmission, Drive Chain, Sprockets
Post Reply
Phil-UK
honda305.com Member
Posts: 229
Joined: Thu Oct 19, 2006 7:04 am
Location: ENGLAND

CB72: 14mm Bushing - which way round ?

Post by Phil-UK » Tue Dec 10, 2013 11:17 am

Hi

Does anyone know if it makes a difference which end the oil feed hole in the 14mm bushing ( 23933-253-000 ) goes ?
Mine has worn the lip/step separate from the bush and had the hole at the kickstart 34T gear end. Parts books don't show it and haven't found anything in Bill's book or using the SEARCH funtion on this site.

cheers

Phil
Top
LOUD MOUSE
honda305.com Member
Posts: 7818
Joined: Mon Aug 15, 2005 8:23 am
Location: KERRVILLE, TEXAS

Re: CB72: 14mm Bushing - which way round ?

Post by LOUD MOUSE » Tue Dec 10, 2013 12:37 pm

The hole installs under the gear and the tapered inside hole of the bushing to the end with the pawl. ..............lm


g
Phil-UK wrote:Hi

Does anyone know if it makes a difference which end the oil feed hole in the 14mm bushing ( 23933-253-000 ) goes ?
Mine has worn the lip/step separate from the bush and had the hole at the kickstart 34T gear end. Parts books don't show it and haven't found anything in Bill's book or using the SEARCH funtion on this site.

cheers

Phil
Top
Phil-UK
honda305.com Member
Posts: 229
Joined: Thu Oct 19, 2006 7:04 am
Location: ENGLAND

Post by Phil-UK » Wed Dec 11, 2013 4:03 am

Thanks Loud Mouse ... I hadn't even noticed that one end was tapered !

Phil
Top
Post Reply

Return to “Transmission”