Home Auctions Gallery Forum

honda305.com Forum

Vintage Honda Owners, Restorers, Riders and Admirers

Broken clutch adjuster bolt?... thoughts on repair procedure

Clutch, Transmission, Drive Chain, Sprockets
Post Reply
Erik C
honda305.com Member
Posts: 7
Joined: Sat Feb 18, 2012 7:55 pm
Location: Redmond, Wa

Post by Erik C » Sat Mar 31, 2012 11:53 am

All I can tell you is that I was told CB77, and it had the right casting for my CA77. I did notice the right crank cover does not have an access hole (will with a rubber insert disk) that I have on the CA77. I'll look at the serial number and my "Silver" book to see if I can sort out what I've really got....
Top
Erik C
honda305.com Member
Posts: 7
Joined: Sat Feb 18, 2012 7:55 pm
Location: Redmond, Wa

Post by Erik C » Sat Mar 31, 2012 12:06 pm

Instant follow up - and I was wrong and you're right. The case number is CA77E-213225, which if I'm reading my Bill Silver book correctly is a '62 engine. Thanks for getting me to go look at the number.
Top
Post Reply

Return to “Transmission”