speedo meter pickup cb77 type two fork

goudreignet · Post by **goudreignet** » Thu Sep 13, 2007 12:59 pm

the speedo meter pickup gear has two oil seals
i want to replace them as they are hardened due to time/age
it is the thin one on the outer rim and the one in the center of the drive

but i can not see/find the partnumbers in the parts manual

does anyone know there numbers

thanks

fred.nl

davomoto · Post by **davomoto** » Fri Sep 14, 2007 3:13 pm

Fred, usually if there's not a part #, it means they were not sold seperately. In other words, one must purchase the entire unit. I may be wrong on this, check with Nick at Ohio Cycle. If anyone has them, it's him.

davomoto

goudreignet · Post by **goudreignet** » Sat Sep 15, 2007 8:55 am

davomoto wrote:Fred, usually if there's not a part #, it means they were not sold seperately. In other words, one must purchase the entire unit. I may be wrong on this, check with Nick at Ohio Cycle. If anyone has them, it's him.

davomoto

because of this "Please Note:
Please call (do not e-mail) for part numbers, availability and shipping cost to your address. All orders must be pre-paid by bank certified check or money order (no credit cards accepted). Minimum order $20.00. Orders shipped to United States addresses only."

ohio cycle is no option for me as i live in the netherlands
or some one on this form can make the inquery by Nick at Ohio Cycle

would be much apriciated

fred.nl

davomoto · Post by **davomoto** » Mon Sep 17, 2007 4:19 pm

Fred, I will check for you. Wkat model bike is this for, and what year?

davomoto

305racer · Post by **305racer** » Mon Sep 17, 2007 6:18 pm

There is also a complete one on "The auction" site with a buy it now.

LOUD MOUSE · Post by **LOUD MOUSE** » Wed Sep 19, 2007 12:42 pm

What are the small numbers on the seal. They give the size of the seal you need. I may have one here but need those numbers to be sure. ..........lm

goudreignet wrote:the speedo meter pickup gear has two oil seals
i want to replace them as they are hardened due to time/age
it is the thin one on the outer rim and the one in the center of the drive

but i can not see/find the partnumbers in the parts manual

does anyone know there numbers

thanks

fred.nl

goudreignet · Post by **goudreignet** » Thu Sep 20, 2007 6:18 am

Boy’s first of all thanks for all the help

with numbers on the big oil seal in the middle
Where loud mouse had written about
I went to searching the internet and found a number of oil seal shops here in the Netherlands
And one of them was able to supply the seal
The oem nr was NOK TC 34 48 7 YI
And they came up with TTO D819 1 TC 34 48 7
Which is an exact replica of the oem seal and that for € 2.50

Loud mouse thanks for pointing out on those numbers

Davomoto the bike is a CB77 dated 1967 which was printed on the wire harness
Your help is appreciated

305racer my pickup gear is in perfect working order, except for the seals i will leave the new option as a very last resource, but thanks for the offer/help

With the middle oil seal sorted that leaves the U shaped O-ring on the outer rim
I was not able to identify any numbers on that seal
Anyone???

fred.nl

Honda305.com Forum

honda305.com Forum

speedo meter pickup cb77 type two fork

speedo meter pickup cb77 type two fork

seals

Re: seals

speedo

Re: speedo meter pickup cb77 type two fork