Front fork seals

skychs · Post by **skychs** » Fri Jun 10, 2016 1:57 pm

VIN CL771049528 1967 CL77 Scrambler

Can anyone verify the correct front fork seal size? Mine have started to leak. I believe I have the later model. Best place to buy them?

Im finding 33-46-10 and 35-46-11/10.5

I found the write up on how to replace them here in the forum.
thanks

Hoosier Tom · Post by **Hoosier Tom** » Fri Jun 10, 2016 7:54 pm

I find part number 91255-292-003, oil seal 35x46x11, Type 2 fork, from frame 1014496 and up.

HT

G-Man · Post by **G-Man** » Sat Jun 11, 2016 2:46 am

Pull your fork gaiter up and measure the diameter of the tube. It will be either 33 or 35 as per the seals you listed.

G

skychs wrote:VIN CL771049528 1967 CL77 Scrambler

Can anyone verify the correct front fork seal size? Mine have started to leak. I believe I have the later model. Best place to buy them?

Im finding 33-46-10 and 35-46-11/10.5

I found the write up on how to replace them here in the forum.
thanks

LOUD MOUSE · Post by **LOUD MOUSE** » Sat Jun 11, 2016 6:12 am

The parts book shows 35-46-10.5. ..................lm

skychs wrote:VIN CL771049528 1967 CL77 Scrambler

Can anyone verify the correct front fork seal size? Mine have started to leak. I believe I have the later model. Best place to buy them?

Im finding 33-46-10 and 35-46-11/10.5

I found the write up on how to replace them here in the forum.
thanks

skychs · Post by **skychs** » Sat Jun 11, 2016 10:56 am

Thanks everyone. That's what I figured. Always good to get a second opinion.

The bike sat for many years. The forks were fine until I changed the fluid. I flushed/added 250 cc to each side. Sounded like a lot but that's the amount I found.

eBay here I come.

honda305.com Forum

honda305.com Forum

Front fork seals

Front fork seals

Re: Front fork seals

Re: Front fork seals

seals