Swing arm Bushings???

Macgyver5 · Post by **Macgyver5** » Wed Sep 12, 2007 9:42 pm

So I'm about to send my frame off to powder coat and I was wondering where do I get new swing arm bushings? I haven't seen them on ebay or any of the vintage honda parts sites that I've found... So I was hoping that someone on here would have a source...

Thanks
Brandon

305racer · Post by **305racer** » Thu Sep 13, 2007 6:56 am

The last place I saw them forsale was Ohio Cycle. You may also wanna check David Silver spares.

Onemilewest · Post by **Onemilewest** » Wed Sep 19, 2007 11:04 pm

GGray recently gave me advice on this. He baked his, so I baked mine. They came out perfect...

Mike

Macgyver5 · Post by **Macgyver5** » Thu Sep 20, 2007 2:43 pm

What about the rubber?

Onemilewest · Post by **Onemilewest** » Thu Sep 20, 2007 11:11 pm

I baked at 400 degrees for 12 min. They appeared to soften a bit, but that was not a bad thing considering how rigid they were to start.

goudreignet · Post by **goudreignet** » Sun Oct 21, 2007 8:11 am

if you are revering to the rubber bushings where the rearshock is mounted on
they Are still available from Honda

fred.nl

Macgyver5 wrote:So I'm about to send my frame off to powder coat and I was wondering where do I get new swing arm bushings? I haven't seen them on ebay or any of the vintage honda parts sites that I've found... So I was hoping that someone on here would have a source...

Thanks
Brandon

honda305.com Forum

honda305.com Forum

Swing arm Bushings???

Swing arm Bushings???

Re: Swing arm Bushings???