Hi,
The needle valves are worn in the carbs on my CB77 - one has a visible score mark around it. The bike runs ok but is running too rich, so I would like to replace the worn parts in the carbs.
Does anyone have any experience with aftermarket needles valves? - Keyster and Sudco are the ones I have come across so far. If anyone has fitted either of these and had good or bad experiences I'd be grateful for advice. Or if anyone knows of a source for NOS needle valves at all?
Thanks,
Steph.
CB77 Carb Needle Valves
-
- honda305.com Member
- Posts: 7817
- Joined: Mon Aug 15, 2005 8:23 am
- Location: KERRVILLE, TEXAS
Re: CB77 Carb Needle Valves
What is a Needle Valve?. ..................lm
stephi_m wrote:Hi,
The needle valves are worn in the carbs on my CB77 - one has a visible score mark around it. The bike runs ok but is running too rich, so I would like to replace the worn parts in the carbs.
Does anyone have any experience with aftermarket needles valves? - Keyster and Sudco are the ones I have come across so far. If anyone has fitted either of these and had good or bad experiences I'd be grateful for advice. Or if anyone knows of a source for NOS needle valves at all?
Thanks,
Steph.
Steph
I assume that you mean the needle attached to the carb slide?
I bought some OEM ones and the jet that it runs in from David Silver a month or so ago. Have you tried adjusting the position of the needles?
PM me and I can send you some carb tuning guides.
Graham
I assume that you mean the needle attached to the carb slide?
I bought some OEM ones and the jet that it runs in from David Silver a month or so ago. Have you tried adjusting the position of the needles?
PM me and I can send you some carb tuning guides.
Graham
'60 C77 '60 C72 '62 C72 Dream '63 CL72
'61 CB72 '64 CB77 '65 CB160
'66 Matchless 350 '67 CL77
'67 S90 '77 CB400F
'61 CB72 '64 CB77 '65 CB160
'66 Matchless 350 '67 CL77
'67 S90 '77 CB400F
-
- honda305.com Member
- Posts: 7817
- Joined: Mon Aug 15, 2005 8:23 am
- Location: KERRVILLE, TEXAS