I found a Hillman #883772 O-ring for the cb77 carb spacer: 28mm x 33 x 2.5mm.
My old o-rings are very flat— good thing the spacers are too!
The carb-flange o-ring was replaced with a Hillman #883773 O-ring: 30 x 35 x 2.5mm
honda305.com Forum
Vintage Honda Owners, Restorers, Riders and Admirers
cb77 carb spacer o-ring
-
marzini
- honda305.com Member
- Posts: 54
- Joined: Thu Nov 08, 2007 3:54 pm
- Location: Santa Fe, New Mexico
cb77 carb spacer o-ring
'62 CB77, '76 XT500