Needle Jet Removal Tool

brewsky · Post by **brewsky** » Tue Jul 05, 2011 5:11 am

Found the perfect tool at the grocery store the other day for removing/installing needle jets without worry of damage.

Price was right too.

joeweir1 · Post by **joeweir1** » Wed Jul 06, 2011 7:58 pm

Brewsky..Do you drive them out from top to bottom or from bottom towards the top?My guess is from bottom ?Never took one out before.

brewsky · Post by **brewsky** » Thu Jul 07, 2011 5:05 am

They come out by driving down from the top.

The end with the larger opening goes "up" when re-installong.

If you can see a nice round hole when the jet holder is removed, there is really no reason to remove it..unless you can see some kind of damage.

If the hole is egg-shaped, then it needs replaced.

chiboy002 · Post by **chiboy002** » Thu Jul 07, 2011 12:55 pm

mines kinda seized up i think

do you need to hammer it out or something?

brewsky · Post by **brewsky** » Thu Jul 07, 2011 5:15 pm

"Tap" would be a better word for it. Soak in PB Blaster or the like first.

chiboy002 · Post by **chiboy002** » Thu Jul 07, 2011 8:26 pm

haha yeah thats what i meant

alright cool, thanks brewsky

honda305.com Forum

honda305.com Forum

Needle Jet Removal Tool

Needle Jet Removal Tool