Fuel System: Gas (Petrol) tanks, Carburators
-
drycounty
- honda305.com Member
- Posts: 21
- Joined: Thu Oct 13, 2005 10:31 pm
- Location: Richmond, VA USA
Post
by drycounty » Mon May 15, 2006 10:56 am
What is the overall consensus on these kits? Are they reliable? Anyone have any other recommendations for rebuild kits?
Thanks in advance,
Erik
-
joeweir1
- honda305.com Member
- Posts: 761
- Joined: Wed Mar 08, 2006 9:35 am
- Location: middletown,pa
Post
by joeweir1 » Mon May 15, 2006 6:15 pm
I put one in my CA77 last year, but the jets were all different sizes than the original.Seems to run ok except I was having some intermittent trouble at full throttle, engine would start to miss like starving for gas.Not 100% sure what may be causing that?
-
drycounty
- honda305.com Member
- Posts: 21
- Joined: Thu Oct 13, 2005 10:31 pm
- Location: Richmond, VA USA
Post
by drycounty » Thu May 18, 2006 11:25 am
I guess I should go ahead and get them. If anything I might reuse some of the original carb parts, but I know of no other company who makes them at the moment.
-
Rookie305
- honda305.com Member
- Posts: 67
- Joined: Tue Nov 15, 2005 12:55 pm
- Location: Salt Lake City, Utah
Post
by Rookie305 » Thu May 18, 2006 12:19 pm
That is what I did. There were a few different sizes of jets in the Keyster kit that were different from the original ones in my carb. So I used the parts in the Keyster kit that matched my original ones, and then reused the original ones that didn't match the parts in the Keyster kit. I just made sure that I cleaned the original parts really well.
