Search found 130 matches
Re: Chain Dragging Sound Behind RotorAfter pulling all right-side engine covers, briefly bump the starter to inspect why the starter chain can be hanging up behind the rotor. Or if you don't want to risk damaging the starter, turn the engine over by hand with the rotor setting bolt. Regarding the kick starter; 1) the splines on the kic...
Re: Bandwidth Limit ExceededMichael,
Thank you for your efforts to keep the Honda 305 Forum up and running.
Bandwidth Limit ExceededBandwidth Limit Exceeded
Get this warning occasionally when trying to log in. What does it mean?
Re: Locating pins under top cylinder cover Here's the best pic I can find showing what might be this part and it's location. This is a picture I found on the internet. This does not appear to be the same location as the knock pin and the bolt looks like the one that comes up by the spark plug hole. Does this look familiar? https://www.honda...
Re: Bill's CB77 Retirement ProjectGreat progress and thanks for the photo updates. Really like the patina-on-white effect. The sliding rod on brake light switch is mechanical. When pulled down by the spring-dampered linkage, the brake light circuit is switched On. Some electronic contact cleaner can free up and clean the sliding rod...
Re: Tach Drive Cover ProblemThe rocker arm pins should be flush. Use a brass drift and tap-tap until the pins are seated.
Re: Do you recognize this?Looks like it's one of two ground cables for CB77. #13 in parts diagram, p/n 32621-268-020: https://images.cmsnl.com/img/partslists/points_bighu0097e8312_3616.gif (Guessing it's this one). or #13 in parts diagram, p/n 32601-268-000: https://images.cmsnl.com/img/partslists/honda-cb77-super-hawk-1961-...
|