Search found 361 matches
Re: C72 from FranceYou can disassemble the bottom end of the engine without disturbing the top end. Just remove the outer cases and clutch etc then flip it upside down and remove the lower case.
Re: C72 from FranceThe fuel tap seal kits are available but here in the uk the Ethanol in the fuel caused the new kit I fitted to swell and jam the tap within two weeks. I ended up fitting a cheap Chinese tap with an adaptor that works fine.
Re: How screwed am I?I did a similar method on an old Norton, I bored inside the rings and then was able to break the piston away without damaging the bore.
Re: C72 from FranceThey should improve the handling, I always felt my CA77 was really nice to ride until you started to corner a bit faster or ride a bumpy road, then it got a bit too exciting.
Re: C72 from FranceThe saddles look great, nice job
Re: How screwed am I?I don’t wish to appear rude but…… why do people take either the carbs off or the plugs out before storing the bike in a river for a few years. Always seems such a shame that what could have been rebuildable becomes a salvage operation!
Re: C72 from FranceHi Michael, I did post the completed frame repair a while ago but for those new to site I’ll show the photos again. Being double skinned meant I had to do it in stages to avoid distortion. Once near completion I used a laser to check for alignment and tweaked the frame before finally finishing the w...
|