Honda305.com Forum

Hmmmm, The fender(as you stated)definately looks out of place and is from a CB450 (per the caption). I've seen pictures of CR engine numbers that do not have the textured background,but that's possibly a result of being sandcast rather than a diecasting as the production cases. Do these crankcases h...

Hi Joe,
I always install the piston pins with the circlips first, then install the cylinder. There is a generous chamfer on the bottom of the bore that will aid the assembly. If you are careful, you won't have any problem.
Randy

I suppose you could make anything fit anywhere, but without totally butchering the cases, it can't be done. After reading the CB360 gear set post I became curious and bought some gear sets and a set of cases from an old CL77. The 305's were a direct drive design (the input and output shafts were loc...

The PN for for a CL77 Shifter is 24701-273-000. They are totally different.
I have seen several for a CB77 on ebay.

They should be set at .004. If you set them at .040, I'll bet they are a bit noisy. The infomation from your manual is metric. it should read .09-.11
which would be .0035-.0043. Good luck!